Mute Operation; One Touch Access For System Features - Panasonic EASA-PHONE KX-T30810 Installation Manual

To enable
Be sure the SP-PHONE indicator is on.
I
Ii' 'I
MUTE
I
I
PRESS
"MUTE"
The MUTE indicator will flash.
To cancel
PRESS
AGAIN
Use when you do not want your voice to be
heard by the other party.
Be sure the SP-PHONE indicator is on.
Press the MUTE button.
The MUTE indicator @ill flash.
To cancel
Press the MUTE button again.
The MUTE indicator will go
out.
s
This feature can be activated in speakerphone
mode only.
To Program
Set the MEMORY switch
of
the
KX- T30830, KX- T30820 or KX- T308.50
to
'PROGRAM".
GRAM".
Example:
Paging All Extensions (Dial 34).
PRESS
"PROGRAMMABLE
FEATURE"
DlAL"34" PRESS
"MEMORY
After programming all the system
fea-
tures, return the MEMORY switch to
"SET".
To Access
LIFTTHEHANDSET PRESS
ORPRESS "PROGRAMMABLE
"SP-PHONE" FEATURE"
1
Features that can be accessed by using the
dialing button also can be programmed into
mory.
(e.g. Paging All Extensions, Background
Music.)
To Program
Set the MEMORY switch of the KX-T30830,
KX-T30820 or KX-T30850 to "PRO
Example:
Paging All Extensions (Dial 34)
d. Press the PROGRAMMABLE FEA-
TURE button.
2. Dial (34).
3. Press the MEMORY button.
System feature described in the table on page
S-5 can be programmed into memory.
After programming all the numbers, return the
MEMORY switch to "SET".
To Access
1. Lift the handset or
press
the "SP-PHONE"
button.
2. Press the PROGRAMMABLE FEA-
TURE button.
3-25