Panasonic EASA-PHONE KX-T30810 Installation Manual page 31

ect automatic switching mode for
day/night service, enter a starting time.
Refer to "Switching Mode (DaylNight Service)"
page 2-10.
. Dial (OS).
"DAYINIGHT TIME" will be displayed.
. Press the NEXT
button.
"DAY: 09:OO AM"
will be displayed as a
default value and "09" will blink.
0 Enter a starting time for day service using
2 digits.
. Press the "13" button.
"00" will blink.
. Enter the minute using 2 digits.
. Press the "0" button.
"AM" will blink.
7, Press the SELECT button to alternate be-
tween "AM" and "PM" to select the correct
setting.
>
8. Press the MEMORY button.
e Press the NEXT button.
"NIGHT: 05:OO PM" will be displayed as a
default value and "0.5" will ,blink.
Q Enter a starting time
for
night service using
2 digits.
. Press the "0" button.
"00" will blink.
u Enter the minute using 2 digits.
~ Press the "$" button.
"PM" will blink.
. Press the SELECT button to alternate be-
tween "'AM" and "PM" to select the correct
setting.
5. Press the MEMORY button.
. To return to the initial program mode, press
the END button.
If
the NEXT button is pressed at step 3
through 7, the display will advance to the
"Night Time input" mode (step 9). The
operations
of
step 3 through 7 are not stored.
If
the PREV button is pressed at step 10
through 14, the display will return to the "day
time input" mode (step 2). The operations
of
step
10 through 14 are not stored.
8:30 AM..
. starting
time
for
day plan
6:30 PM.. starting time
for
night plan
See page
5-14.
2-12