NEC Express5800/320Fd-LR User Manual page 168

4-42 System Configuration
Select SAS/SATA Disk and press <Enter>
Device
#0
#1
#2
#3
#4
#5
#6
#7
#8
#9
#10
#11
#12
#13
#14
#15
Drive with + sign is Bootable
Use Page Up or Page Down keys to move to next page
See the following table for each item.
Item
Format Disk
Verify Disk Media
Indicate LED
Write Cache
Setting
Connection Rate
Set Bootable
Adaptec SAS/SATA Controller#0
Box Slot
FF FF
00 FF
00 FF
00 FF
00 FF
00 FF
00 FF
Format Disk
00 FF
Verify Disk Media
00 FF
Indicate LED
00 FF
00 FF
Write Cache Setting
00 FF
Connection Rate
00 FF
Set Bootable
00 FF
00 FF
00 FF
Parameter
―
―
―
Enabled
[Disabled]
[Auto]
1.5Gb/s
3.0Gb/s
Enabled
[Disabled]
Model
HITACHI HUS151436VLS300
No device
No device
No device
No device
No device
No device
No device
No device
No device
No device
No device
No device
No device
No device
No device
Description
Low-level format is simulated by writing entire disk to
zero.
TIPS:
Low-level format is performed to the disk drive at
factory.
You do not need to perform low-level format again.
IMPORTANT:
All the data on the disk is deleted. Back up your data
before performing this operation.
Check for errors by scanning the disk drive media
Flash the LED on the selected disk drive.
Enable/Disable Write Cache.
The data transfer rate of disk drive. The initial value is
set to [Auto]. You do not need to change it.
Set the disk drive to the bootable disk drive. You do
not need to change it.
FW Rev
A340
[ ]: factory default