NEC Express5800/320Fd-LR User Manual page 493

Driver installation procedure
TIPS:
To perform this procedure, you have to log on the system as an Administrator or a member of the
Administrators group.
1.
Mount N8803-032 SCSI board and start Windows Server 2003. When this launches, [New
Hardware Detected] window appear and the driver will be installed automatically. However,
the standard driver for the OS is not applicable on the ft server. Therefore, update the driver
with the following procedure.
2.
Insert the "NEC EXPRESSBUILDER" DVD into the DVD-ROM drive and run the
following command after starting the command prompt.
Run either of the below command depending on the OS:
<32bit> Optical disc drive: \001\win\has\w2k3\HASSETUP\LAN\INSTALL.VBS
<64bit> Optical disc drive: \001\win\has\w2k3amd64\HASSETUP\LAN\INSTALL.VBS
3.
Confirm the driver's version.
From [Device Manager], select [SCSI and RAID Controller]. Right-click [Adaptec SCSI
Card 29320ALP-Ultra320 SCSI] and display the property. Click [Driver] tag and confirm
whether the driver version is 7.0.0.7. (see below).
System Upgrade 8-39