NEC Express5800/320Fd-LR User Manual page 212

4-86 System Configuration
No. Error message
7
Failed to establish the RMCP+
session.
8
The RMCP+ transmission failed.
9
The specified RMCP+ protocol
cannot be used.
10 BMC resources to establish a new
RMCP+ session are insufficient.
11
The RMCP+ session time-out
occurred.
BMC-related error
No. Error message
1
The IPMI request was aborted.
2
Received bad response from
BMC.
3 BMC does not support IPMI 2.0
functions.
4
Failed to run the IPMI command.
5
Failed to send the IPMI message.
6 Illegal IPMI message was
requested.
7
Specified target is not present.
Errors on the Remote KVM Console
No. Error message
1
Failed to disable Remote KVM
Console.
2
Failed to enable Remote KVM
Console.
3 KVM packet transmission failed.
representative.
Check the network environment.
If there is no network problem, contact your service
representative.
Check the network environment.
If there is no network problem, contact your service
representative.
Check the network environment.
If there is no network problem, contact your service
representative.
Try again after a connection from other client is
finished.
Check the network environment and server.
If you do not find any problem, contact your service
representative.
The network may be busy. Try again. If the error
persists, contact your service representative because
a failure may have occurred in BMC.
Check the server. A failure may have occurred in
BMC.
If you do not find any problem, contact your service
representative.
Contact your service representative.
Check the server. A failure may have occurred in
BMC.
If you do not find any problem, contact your service
representative.
Check the network environment.
If the network has no problem, contact your service
representative.
Contact your service representative.
Check the server. A failure may have occurred in
BMC.
If you do not find any problem, contact your service
representative.
Check the network environment and try again.
Contact your service representative if the error
persists.
Check the network environment and try again.
Contact your service representative if the error
persists.
Check the network environment and server.
Action
Action
Action