NEC Express5800/320Fd-LR User Manual page 474

8-20 System Upgrade
7.
Remove the DIMM connector cover from
the socket in which the DIMM is installed.
A DIMM connector cover is installed to
the open socket. When the levers on both
ends of the connector are opened, the
DIMM connector cover is unlocked and
you can remove the cover.
IMPORTANT:
Keep the removed DIMM connector
cover.
8.
Insert a DIMM into the DIMM socket vertically.
TIPS:
Pay attention to the orientation of the
DIMM. The terminal of the DIMM has a
cutout to prevent misinsertion.
After the DIMM is completely inserted into
the socket, the levers are automatically closed.
9.
Attach the memory duct
10.
Place the top cover of the CPU/IO module and
secure it with the screws.
11.
Refer to page 8-15 and install the CPU/IO module.
12.
Connect the power cords.
13.
Press the POWER switch to power on the server.
14.
Verify that POST displays no error message.
If POST displays an error message, write it down and see the POST error message list on page
7-4.
DIMM connector