Modifying Appassure 5 Engine Settings; Modifying Database Connection Settings - Dell PowerVault DL4000 User Manual

NOTE: You must restart the Core service for the changes to take effect.

Modifying AppAssure 5 Engine Settings

To modify AppAssure 5 engine settings:
1. Navigate to the AppAssure 5 Core Console and click the Configuration tab, and then Settings.
2. In the Replay Engine Configuration area, click Change.
The Replay Engine Configuration dialog box is displayed.
3. In the Replay Engine Configuration dialog box, specify the IP address. Choose one of the following:
– Click Automatically Determined to use the preferred IP address from your TCP/IP.
– Or, click Use a specific address to manually enter an IP address.
4. Enter the configuration information as described below.
Text Box
Port
Admin Group
Minimum Async I/O
Length
Read Timeout
Write Timeout
Receive Buffer Size
Send Buffer Size
5. Select No Delay.
6. Click OK.

Modifying Database Connection Settings

To modify database connection settings:
1. Navigate to the AppAssure 5 Core Console and click the Configuration tab, and then Settings.
2. In the Database Connection Settings area, perform one of the following:
– Click Apply Default.
– Or, click Change.
The Database Connection Settings dialog box is displayed.
3. Enter the settings for modifying the database connection as described below.
Text Box
Host Name
Port
50
Description
Enter a port number or accept the default setting. The default port is 8007. The port is used
to specify the communication channel for the AppAssure engine.
Enter a new name for the administration group. The default name is BUILTIN
\Administrators.
Enter a value or choose the default setting. It describes the minimum asynchronous input/
output length. The default setting is 65536.
Enter a read timeout value or choose the default setting. The default setting is 00:00:30.
Enter a write timeout value or choose the default setting. The default setting is 00:00:30.
Enter an inbound buffer size or accept the default setting. The default setting is 8192.
Enter an outbound buffer size or accept the default setting. The default setting is 8192.
Description
Enter a host name for the database connection.
Enter a port number for the database connection.