NEC Express5800 320Fd-MR User Manual page 145

CPU/PCI module < Stop > ... OFFLINE
* This becomes DUPLEX after the INITIALIZING or DIAGNOSTICS.
- The following message may be registered on the syslog when starting the system.
"ntagent: libft init failed"
<Workaround>
When ESMftreport/ESMps process does not work, login as a root user and execute ESMRestart.
<Process confirmation procedure>
# ps aux | grep ESM
<ESMRestart executing procedure>
# /opt/nec/esmpro_sa/bin/ESMRestart
File System Monitoring
On the file system monitoring of NEC ESMPRO Agent, vmfs areas are not monitored.
Maintenance-related Functions
When you want to use maintenance-related functions of the NEC Express5800/ft series, contact
your maintenance personnel.
Each Sensor Monitoring Setting
Dataviewer can show information on temperature, fan and voltage sensor, but it cannot change
monitoring status itself or the threshhold level. The threshhold level is appropriately set for NEC
ESMPRO Agent.
Update Interval Setting of DataViewer
Update interval setting of DataViewer must be 60 seconds as the default setting or more.
If the interval setting of Dataviewer is set less than 60 seconds while Dataviewer is launching, the
notification may delay or may leak.
About portmap
NEC ESMPRO Agent uses portmap function.
If portmap stops or NEC ESMPRO Agent reboots while NEC ESMPRO Agent is operating, NEC
ESMPRO Agent does not work appropriately.
Run the following command and reboot NEC ESMPRO Agent.
Installing and Using Utilities 5-15