NEC Express5800 320Fd-MR User Manual page 229

IMPORTANT:

Secure the handle with the screws. If it is not secured by the screws, the operation of the
CPU/IO module will be unstable.

In some system statuses or settings, auto start up or integration does not take place when
the module is connected. In such a case, check the status by using the ftServer Utility or
NEC ESMPRO Manager data viewer, and then start up the CPU/IO modules.
3.
Connect the cables for connecting the peripheral devices and network.
4.
Hold the stopper with your hand and insert the cable of the installed module.
5.
The installed CPU/IO module will be automatically started.
IMPORTANT:

When replacing Fibre channel controller installed in the server
- configure the setting by iStorage Manager after replacing
- configure the setting of the Fibre Channel controller by restarting from the replacing
side of the CPU/IO module. The setting refers to Chapter 4 of User's Guide (Setup).
If the setting is not configured, VMware may not start up because iStorage is
not found.
System Upgrade 8-11