NEC Express5800 320Fd-MR User Manual page 147

Impact When Module Status Changes
PCI modules, PCI slot and Ethernet board have impact on each other. For example, when the
"Status" item of a module changes to "fault," it may be caused by another module's error. Therefore,
you need to check the status of the other modules based on alert information.
LAN Monitoring Report
The LAN monitoring function defines the line status depending on the number of transmission
packets and the number of packet errors within a certain period. Thus, the LAN monitoring function
may report a line fault or high line load only in a temporary high line impedance state. If a normal
state recovery is reported immediately, temporal high line impedance may have occurred thus there
is not any problem.
LAN Monitoring Threshold
Because the NEC Express5800/ft series detects hardware faults on the network in the driver level,
NEC ESMPRO Agent does not monitor line faults. Thus, the value set for "Line fault occurrence
rate" of a [LAN] tab of [NEC ESMPRO Agent properties] in the control panel is not used.
Hardware Monitoring by ESMPRO
On this server, power supply is not monitored. Moreover, the tree of [Power Supply] is not
displayed on [System Environment] of DataViewer of NEC ESMPRO Manager.
System Environment Monitoring
On this server, monitoring of temperature, fan and voltage under [System Environment] of
[ESMPRO] tree in the DataViewer is set to enable and cannot be changed to disable by default.
Change of SNMP Community
If the security setting of the SNMP Service of a system, where the NEC ESMPRO Agent is installed,
is changed from the default "public" to a community name, change the community settings of the
NEC ESMPRO Agent, too.
1.
Log on as a user with root privilege
2.
Move to the directory where the control panel of NEC ESMPRO Agent is stored.
# cd/opt/nec/esmpro_sa/bin
3.
Start the control panel.
# ./ESMagntconf
The Control Panel window appears.
Installing and Using Utilities 5-17