4-2 System Configuration
SYSTEM BIOS – SETUP –
The SETUP utility is provided to make basic hardware configuration for the server. This utility is
pre-installed in the flash memory of the server and ready to run.
IMPORTANT:
Change the setting of the SETUP if needed referring to this chapter since the status of
SETUP by factory default is not most typical and appropriate for the server.
The SETUP utility is intended for system Administrator use only.
The SETUP utility allows you to set a password. The server is provided with two levels of
password: Supervisor and User. With the Supervisor password, you can view and change all
system parameters of the SETUP utility. With the User password, system parameters
available for viewing and changing are limited.
Do not set any password before installing the OS.
The server contains the latest version of the SETUP utility. Dialog boxes appearing on your
SETUP utility, thus, may differ from descriptions in this User's Guide. If you find anything
unclear, see the online help or ask your sales agent.