Setup Of Optional Pci Board - NEC Express5800 320Fd-MR User Manual

Setup of Optional PCI Board

IMPORTANT:

To enable the fault-tolerant feature of the optional device, the identical PCI boards must be
installed to the slots with the same number in CPU/IO module 0 and CPU/IO module 1.

The BIOS settings need to be modified when mounting some optional PCI boards. To change
the BIOS settings, start the BIOS setup utility to change the [OS Boot Monitoring]
configuration in [Server] – [Monitoring Configuration]. See page 4-25 for more details.

For the supported connecting devices, contact your sales agent.
N8804-002 1000BASE-T 1ch board set
N8804-003 1000BASE-SX 1ch board set
IMPORTANT:
For LAN cable's connector, use a RJ-45 connector which confiorms to IEC8877 standard. If any
other connector is used, it may become difficult to remove easily.

List of slots to install optional PCI boards
Refer to "List of option PCI boards and installable slots" on page 8-26.

Driver installation procedure
You do not need to install a driver since the driver for N8804-002, N8804-003 boards is included in
the Os.
After attaching the boards, configure duplication settings with reference to "DUAL LAN
CONFIGURATION" in pages 3-2.
System Upgrade 8-29