NEC Express5800 320Fd-MR User Manual page 159

Monitoring SCSI adapter on PCI module
To monitor the SCSI adapters on the PCI modules, see the [SCSI adapter] tree. To see the
information on the [SCSI adapter] tree, select [PCI Module][PCI module (connected to SCSI
adapter to be seen)][SCSI adapter] of the [ft] tree.
You can see the following information on the SCSI adapters in the [SCSI adapter] tree. This
function is not supported in the current version.

General
This function is not supported in the current version.

Maintenance
This function is not supported in the current version.

Update
This function is not supported in the current version.

SCSI bus
This function is not supported in the current version.
Monitoring Ethernet adapter on PCI module
To monitor the Ethernet adapters on the PCI modules, see the [Ethernet Board] tree. To see the
information on the [Ethernet Board] tree, select [PCI Module][PCI module (connected to the
Ethernet adapter to be seen)][Ethernet Board] of the [ft] tree. You can see the following
information on the Ethernet adapters in the [Ethernet Board] tree.
IMPORTANT:
When the Ethernet adapter is unused (i.e. cables are not connected to its port), NEC ESMPRO
Agent determines that the port is faulty (does not have any media), and the status color of [ft] – [PCI
module] – [Ethernet Board] of the Data Viewer turns red (abnormal). The server status color of
Operation Window also turns red (abnormal).
As for the ports of the unused Ethernet adapeter, connect the unused port of PCI module 0 and that
of PCI module 1 with a cross cable.
Installing and Using Utilities 5-29