NEC Express5800 320Fd-MR User Manual page 148

5-18 Installing and Using Utilities
4.
Click [General].
The [General Properties] window appears.
5.
Select a SNMP community name used when you retrieve local machine information in the
[SNMP Community] box. (Select by "↑" key or "↓" key.)
6.
Click [OK] to quit.
The Detail Information of Alert
Detail information of some alert displayed on the alert viewer may be displayed as "Unknown."
Connection with Hard Disk Drive
The preventive hard disk drive maintenance function may not work properly when a hard disk drive
which was used in a system where NEC ESMPRO Agent is installed is connected to other systems.
Make sure not to connect such hard disk drives.
Change Settings of File System Monitoring Function
New settings in thresholds of monitoring interval and free space monitoring are not reflected
immediately after they are changed. They are reflected at the next monitoring interval of monitoring
service.
File System Monitoring on the system using NEC EXPRESSCLUSTER
When using NEC ESMPRO Agent in the cluster environment configured by NEC
EXPRESSCLUSTER, there is the following limitation:
If a failover occurs, the settings of the threshold for the empty space monitoring function and the
enable/disable of monitoring of the operating sever are not inherited to the standby server. Make
sure to reset the threshold and the enable/disable of monitoring on the standby server.
CPU Load Ratio of snmpd Service
While monitoring the server from NEC ESMPRO Manager, the CPU load ratio of snmpd Service on
the NEC ESMPRO Agent side may increase at every monitoring interval (default: 1 minute).
NEC ESMPRO Manager and NEC ESMPRO Agent exchange information through snmpd Service.
If the server status monitoring by NEC ESMPRO Manager is on (default: ON), NEC ESMPRO
Manager regularly issues a request to NEC ESMPRO Agent to get the current status of the server. In
response, NEC ESMPRO Agent checks the status of the server. As a result, the CPU load ratio of
snmpd Service increases temporarily.
If you have trouble of terminating a movie player application, turn off the server status monitoring
by NEC ESMPRO Manager or extend the monitoring interval.