Appendix A Specifications - NEC Express5800 320Fd-MR User Manual

Appendix A
Specifications
Item
Factory-set model
CPU Type
Clock/second cache
Standard
Maximum
Chipset
Memory Standard
Maximum
Expansion unit
Memory module
Error check
Graphics (VRAM)
Auxiliary Floppy disk (option)
input
DVD-ROM
device
(standard)
Hard disk (standard)
Hard disk
(maximum)
ExtensionFile bay (3.5 inch)
Additional slot
LAN interface
External USB
interface
Network
Display
NEC
Express5800/320Fd-LR
N8800-128F
Install model
Quad-Core Intel Xeon
Processor 2.00GHz
1333MHz/6MB  2
Up to 1 processors (the number of processors installed per
module)
Up to 2 processors (the number of processors installed per
module)
Intel Blackford + ESB2M
2GB (1GB x 2*)
* the number of memory per module
12GB (The standard DIMM
must be replaced.)
2 DIMMs
DDR II SDRAM DIMM (Fully Buffered)
ECC
ATI ES1000
3.5 inch drive x 1 (USB)
DVD Comboÿ Load type: tray. Speed: x6ÿ
None
None
None
PCI-X 133MHz, 64bit, Low Profile x1, PCI-X 133MHz, 64bit
Full Height, Full Length x1, (Fibre Channel board is
implemented standard.)1 slot (Low profile : PCI-X 133MHz,
64 bit), 1 slot (Full height, full length : PCI-X 100MHz, 64 bit),
1 slot (PCI-Express x4 lane x8)
1000BASE-T/100BASE-TX/10BASE-T (2 ports)
4-pin connector (3 ports) Keyboard occupies 1one port.
RJ-45 (2 ports)
MINI D-sub 5-pin (1 port)
NEC
Express5800/320Fd-MR
N8800-129F
Quad-Core Intel Xeon
Processor 3.00GHz
24GB (The standard DIMM
must be replaced.)