GE MDS entraNET 900 Technical Manual page 114

APLIST
AUTH
COM1
104
Configures a list of approved APs.
Optional arguments:
—Configures a list of approved APs.
APx=<integer>
1–50, and is the serial number of an approved AP (1–99999999).
integer
To delete an entry, enter a serial number of 0; this indicates that the slot
is not filled.
AP1=<integer>
AP2=<integer>
.
.
.
AP50=<integer>
—Clears all entries in the AP list. Set
CLEAR
using this command to avoid restricting Remotes to associating with an
empty list.
—Displays all settable optional arguments and their current values.
CMD
You can copy this list to a text file as a record of your configuration.
RESTRICT=<ON|OFF>
the list.
—The Remote can only associate with an AP on the list.
ON
—The Remote can associate with any AP.
OFF
Displays the list of authorized features, or changes the Authorization
Key that controls these features.
Optional arguments:
—Enter a valid authorization key (1–16 characters), which is
KEY=<key>
used to enable or disable software features.
(Example:
AUTH KEY=123456abcdef
—Displays all settable optional arguments and their current values.
CMD
You can copy this list to a text file as a record of your configuration.
Optional arguments:
—Sets or displays the baud rate setting as 1200, 2400, 4800,
BAUD=<bps>
9600, 19200, 38400, 57600, or 115200 bps.
—Sets or displays the maximum
BUFFER=<bytes>
(1–1500).
—Displays all settable optional arguments and their current values.
CMD
You can copy this list to a text file as a record of your configuration.
MDS entraNET Technical Manual
Serial Number of approved AP
Serial Number of approved AP
Serial Number of approved AP
—Turns on or off restricting registration to APs in
)
is a number from
x
to before
RESTRICT OFF
port buffer size
COM1
05-4055A01, Rev. E