GE MDS entraNET 900 Technical Manual page 140

130
13.The next screen prompts for the Port Status. Press
Status. Press
SPACE
Press when "enabled" is displayed. Then press
ENTER
14.The final screen displays all the previous settings for your review.
The settings should be:
• COM2 Port Status: Enabled
• COM2 Mode: Serial to Serial
• COM2 Remote Unit ID: [Unit ID displayed]
• COM2 Remote COM Port: COM2
• COM2 Baud Rate: 19200
• COM2 Byte Format: 8N1
• COM2 Buffer Size: 256 Bytes
• COM2 Inter Packet Delay: 4 Character lines
MDS entraNET Technical Manual
to toggle between "enabled" and "disabled".
Figure 5-14. Enable Port
to select Port
A
to continue.
N
05-4055A01, Rev. E