GE MDS entraNET 900 Technical Manual page 49

05-4055A01, Rev. E
NOTE: When using a Local Area Network (LAN) to access the radio,
it may be necessary to change the computer IP access to the
LAN in order to be compatible with the entraNET radio
(compatible subnets). You can identify or verify the radio IP
address by using a Local Console session to communicate with
the entraNET radio through its
Starting Information Screen.
2. Start the Telnet program on your computer, targeting the IP address
of the radio to which you are connected, and press
TIP: A Telnet session can be started on most PCs by selecting
grams > Accessories > Command Prompt
window, enter the word
example,
telnet 10.1.1.168
screen.
NOTE: Never connect multiple radios to a network with the same IP
address. Address conflicts will result in improper operation.
3. Enter the username (the username default is
Next, the
Password
password is ). For security, your password keystrokes do not
admin
appear on the screen. Press
The Starting Information Screen is displayed
here, you can review basic information about the radio, or press
proceed to the Main Menu.
NOTE: Passwords are case sensitive. Do not use punctuation marks.
You may use up to eight alphanumeric characters.
MDS entraNET Technical Manual
COM 1
. At the command prompt
, followed by the radio IP address (for
telnet
). Press
ENTER
prompt appears. Enter your password (the default
.
ENTER
port and viewing the
.
ENTER
Start > Pro-
to display the Telnet log-in
). Press
admin ENTER
(Figure 3-8). From
.
to
G
39