GE MDS entraNET 900 Technical Manual page 93

05-4055A01, Rev. E
Figure 3-47. View Event Log Screen
•
Clear Event Log
TIP: Save your Event Log before clearing it to retain poten-
tially valuable troubleshooting information. See
CONFIGURATION SCRIPTS
view of how to transfer files from the transceiver to a com-
puter on the network using TFTP (Trivial File Transfer
Protocol).
•
Send Event Log
transfer of the Event Log in a plain text (ASCII) file to a TFTP
server on the connected LAN.
•
Event Log Host Address
the computer on which the TFTP server resides.
[
Any valid IP address; 127.0.0.1
•
Event Log Host Filename
given to the Event Log file sent to the TFTP server for
archiving.
[
Any 40-char alphanumeric string; eventlog.txt
NOTE: You might want to change the Event Log file name to reflect
the type of log you intend to archive, or its date.
•
TFTP Timeout
the TFTP server waits for a packet ACK (acknowledgment)
from the transceiver before suspending the file transfer.
[
10 to 120 sec; 30
•
Syslog Server Address
a syslog server as they occur. Use this field to enter the IP
address of this server. [
MDS entraNET Technical Manual
Invisible place holder
Invisible place holder
—Purges the log of all stored events.
(Telnet or Terminal only)—Initiates TFTP
(Telnet or Terminal only)—IP address of
]
(Telnet or Terminal only)—Name to be
(Telnet or Terminal only)—Number of seconds
]
—The radio can also pass log messages to
Valid server IP address
USING
on Page 181 for an over-
]
]
83