Din Rail Mounting Option; Site Selection - GE MDS iNET 900 Reference Manual

05-2806A01, Rev. J
Figure 4-3. Mounting Bracket Dimensions

DIN Rail Mounting Option

The unit may also be mounted with an optional 35mm DIN Rail
Mounting Bracket (Part No. 03-4022A02). Equipment cabinets and
racks of recent design often employ this type of mounting. Once the DIN
bracket is mounted to the iNET case, it allows for quick installation and
removal of the radio without the need for tools of any kind. Figure 4-4
shows how the DIN Rail bracket attaches to the back of the unit's case,
and how the entire unit attaches to the mounting rail.
Step 1: Attach the bracket using the
the two screws provided. (Attach to
the end opposite the connectors.)
Figure 4-4. DIN Rail Mounting of GE MDS Equipment

4.1.2 Site Selection

Suitable sites should provide:
• Protection from direct weather exposure
• A source of adequate and stable primary power
iNET Series Reference Manual
Invisible place holder
Invisible place holder
7.25˝ (18.4 cm)
Invisible place holder
Step 2: Snap the assembly onto the
DIN Rail. Removal is performed by
pulling down on the release tab.
.
Release Tab
129