The Wireless Network Status Screen (Remotes Only) - GE MDS iNET 900 Reference Manual

94
The Wireless Network Status Screen
Figure 2-57. Wireless Network Status Screen
•
Connection Status
munication.
• Scanning—The unit is looking for an Access Point beacon
signal.
• Exp(ecting) Sync(hronization)—The unit has found a valid
beacon signal for its network.
• Hop Sync—The unit has changed its frequency hopping pat-
tern to match that of the Access Point.
• Connected —The unit has established a radio (RF) connec-
tion with the Access Point, but has not obtained cyber-secu-
rity clearance to pass data.
• Associated —This unit has successfully synchronized and
associated with an Access Point. This is the normal status.
• Alarmed—The unit is has detected one or more alarms that
have not been cleared.
•
Current AP Mac Address
which the Remote is associated.
•
Current AP IP Address
the Remote is associated.
•
Association Date
Access Point.
•
Association Time
the association date.
•
Latest AP Firmware Version
•
AP Auto Upgrade
•
AP Reboot when Upgraded
iNET Series Reference Manual
(Remotes Only)
—Current state of the wireless network com-
—Wireless address of Access Point with
—IP address of Access Point with which
—Date of last successful association with an
—Time of day association was established on
05-2806A01, Rev. J