Motorola RS507-IM2xxxxSTWR Product Reference Manual page 191

7 - 22 RS507 Product Reference Guide
Manually enter the BD address to the PC Tool application and click the Generate button.
8.
SPP - PC Tool Application - Bar Code Generator
Figure 7-25
Open the incoming COM port assigned (for example, COM7) in the application. After the COM port is opened
9.
the computer connects to the RS507 and a beep will sound. For demonstration, refer to
SPP connection with a computer on page
NOTE If the COM port is not opened prior to the connection, the RS507 will fail to connect.
To start the connection process:
10.
•
Aim the RS507 at about 7" (18 cm) away from the computer screen and scan the bar code of the BD address
of the computer (or the other target device).
7-34.
How to demonstrate