Wall Mount - Motorola RS507-IM2xxxxSTWR Product Reference Manual

2 - 4 RS507 Hands-Free Imager Product Reference Guide

Wall Mount

!
WARNING
To mount the Charger on a wall:
Mark the screw location on the wall.
1.
Use four screws to mount the Charger to a wall. Be sure to use additional wall mounting hardware, as needed,
2.
for safe mounting according to the wall type.
Connect the power supply cable to the power connector on the back of the Charger (see
3.
Use the Power Supply Cable Duct, on the back of the Charger, to route the Power Supply Cable to the left or
4.
right side of the Charger.
Place the Power Supply Unit on a shelf or tabletop.
5.
Connect the AC plug of the AC Power Cord to a standard electrical outlet.
6.
38 mm (1.5 inches)
Wall Mounting of Charger
Figure 2-3
For safe mounting, it is essential to use wall anchors appropriate to the wall type (i.e. plaster,
drywall, concrete, etc.). Mount to wood studs whenever possible.
220 mm (8.6 inches)
Figure 2-3).
5 mm
(0.19 inches)
10 mm
(0.39 inches)