Motorola RS507-IM2xxxxSTWR Product Reference Manual page 197

7 - 28 RS507 Product Reference Guide
To start the connection process, aim the RS507 at about 7" (18 cm) away from the front of the computer
5.
screen.
Scan the bar code of the BD address of the computer (or other target device).
6.
The RS507 Scan LEDs start flashing green indicating that the RS507 is attempting to establish connection with
7.
the computer.
Check the Always allow this device to access this service box and click OK.
8.
Bluetooth Service Authorization Dialog
Figure 7-33
NOTE When using an earlier BT version that is not equipped with Secure Simple Pairing, a passkey is required
only for the first connection. Check the
click Next.
Upon successful BT pairing, RS507 bleeps and the BT icon in the computer desktop tray turns green.
BT Icon
BT Icon In Computer Desktop Tray - Windows XP SP3
Figure 7-34
At this point, the RS507 is ready to scan and send bar codes over the assigned serial port.
Find the assigned serial incoming port, right click the BT icon and select Bluetooth Configuration > Client
9.
Applications tab.
NOTE Do not confuse the BT serial port assigned as Incoming (RS507 initiates the connection) with the BT serial
port assigned as Outgoing (The computer initiates the connection and RS507 is discovered - Slave Mode).
Let me choose my own passkey 12345
button, enter and