Battery Age Test; Charge Status Led - Motorola RS507-IM2xxxxSTWR Product Reference Manual

2 - 6 RS507 Hands-Free Imager Product Reference Guide

Battery Age Test

The battery age test checks the battery capacity when fully charged. A worn-out battery is considered to have less
than 80% of its nominal capacity. The battery test is simultaneously performed for all batteries inserted into the
charger. It is recommended to perform battery age testing once a month. The age test may take up to 16 hours.
NOTE A battery removed during test and re-inserted is excluded from the test but continues normal charging.
To test the battery(s):
Insert one or more batteries into Charging Bay(s).
1.
Press and hold the Test Button for approximately 3 seconds until the Charge Status LED of each active bay
2.
flashes green.
Refer to the table below when the indication of the Charge Status LED changes.
3.

Charge Status LED

The Charge Status LEDs show the charge status of each Charging Bay:
Charge LED - Status Indications
Table 2-1
LED Indication
Flashing amber
Solid amber
Flashing green
Flashing red/green
Solid green
Solid red
Flashing red
Charging in progress.
Charging is completed.
Battery age testing in progress.
Defective battery or error in charging; re-insert the battery into the bay.
Battery age test and charge are completed. Battery is good.
Battery age test and charge are completed. Battery capacity is marginal.
Battery age test and charge are completed. Battery is worn out.
Status