Imager Attributes - Motorola RS507-IM2xxxxSTWR Product Reference Manual

Imager Attributes

Table 4-1 lists the Imager attributes that can be changed using the RSMSample application.
lists of Imager Attributes
Table 4-1
Attribute
ATTR_SCANLINE_WIDTH
ATTR_DISABLE_GOOD_DECODE
_LED_BEEP
ATTR_MODEL_NUMBER
ATTR_SERIAL_NUMBER
ATTR_DATE_OF_MANUFACTURE
ATTR_DATE_OF_SERVICE
ATTR_BT_ADDR
ATTR_BT_AUTHENTICATION
ATTR_BT_ENCRYPTION
ATTR_BT_PINCODE
ATTR_RECONNECT_ATTEMPTS
ATTR_BEEP_ON_RECON_ATTEM
PT
Access Values
R/W 0 –
(Pick list disabled)
2 – Narrow
(Pick list enabled)
R/W 0- Enabled automatically
green LED and beep on
good decode.
1- Disabled
R N/A
R N/A
R N/A
R N/A
R N/A
R/W 1 - Enabled
0 - Disabled
R/W 1 - Enabled
0 - Disabled
R/W Up to six characters
R/W 6 = 30 sec, 7 = 35 sec, 8
= 40 sec, 9 = 45 sec, 10 =
50 sec, 11 = 55 sec, 12 =
60 sec
R/W 1 - Enabled
0 - Disabled
RS507 Update and Configuration
Factory
Description
Default
0 Width of laser scan line
or size of Imager's
effective Field of View
(Pick list)
Good decode feedback
on Imager
N/A Model number
N/A Serial number
N/A Date of manufacture
N/A Last date of repair by
Motorola
N/A Imager Bluetooth
address
1 Enable Bluetooth
authentication
(Permanently saved)
1 Enable encryption over
Bluetooth (Permanently
saved)
"12345" Pin code when Bluetooth
Authentication is enabled
(Permanently saved)
6 Reconnect attempt
duration when the
Imager is out of range
0 When enabled, the
Imager emits 5 short high
beeps every 5 seconds
while the reconnection
attempt is in progress
4 - 7