3 - 4
RS507 Hands-Free Imager Product Reference Guide
Installation
To install the Comfort Pad:
Position the Comfort Pad onto the Imager as shown.
1.
Installation of Comfort Pad
Figure 3-2
Press the Comfort Pad onto the Imager. When properly installed, the Comfort Pad locks into place.
2.
Trigger Swivel Assembly Replacement
Removal
To remove the Trigger Swivel Assembly:
Turn the Imager upside-down.
1.
Remove the Comfort Pad.
2.
Use a paper clip or similar object to press the Release Latch.
3.
3
2
Release Latch
Removal of Trigger Swivel Assembly
Figure 3-3
Rotate the Trigger Swivel Assembly to align with the back of the Imager.
4.
Lift the Trigger Swivel Assembly off the scan assembly.
5.
Imager Back
1