Programmable Function Keys - NEC SL1000 Programming Manual

ISSUE 1.0
Program 15 : Extension, Basic Setup
Level
SA
Description
Use Program 15-07 : Programmable Function Keys to assign functions to a multiline terminal line
keys.
For certain functions, you can append data to the key basic function. For example, the function 26 ap-
pended by data 1 makes a Group Call Pickup key for Pickup Group 1. You can also program Function
Keys using Service Codes.
To clear any previously programmed key, press 000 to erase any displayed code.
Input Data
Extension Number
Default Settings
Line Key
LK01
:
LK12
LK13
:
LK24
Line Key Num-
Item No.
ber
01 1 ~ 24
Programming Manual

15-07 : Programmable Function Keys

Function Number
01 (Trunk Line Key)
*
:
01 (Trunk Line Key)
*
0 (No setting)
:
0 (No setting)
Function Number
0 ~ 99, #0 ~ #99
(Normal Function Code) (Service Code 851 by default)
00 ~ 99
* *
(Appearance Function Code) (Service Code 852 by de-
fault)
SL1000/SL1100
Maximum four digits (SL1000)
Maximum eight digits (SL1100)
Additional Data
1
:
12
0
:
0
Additional Data
Refer to Table 2-2 Function
Number List on the next
page.
Program
15
2-131