Dial Analysis Table For Ars/Lcr - NEC SL1000 Programming Manual

SL1000/SL1100
Level
IN
Description
Program
Use Program 26-02 : Dial Analysis Table for ARS/LCR to set pre-transaction tables for selecting
Automatic Route Selection (ARS/F-Route).
26
• Service Type 1 (Route to Trunk Group Number) - The number routes to a trunk group.
• Service Type 2 (F-Route Selected) - The number is controlled by the F-Route table.
Input Data
Item
No.
01 Dial
02 ARS Service Type
03 Additional Data/
Service Number
04 ARS Class of Service
05 Dial Treatment for
ARS
06 LCR Carrier Table
07 Network Specified
Parameter Table
Conditions
None
Feature Cross Reference
• Automatic Route Selection (ARS/F-Route)
2-294
Program 26 : ARS Service & Least Cost

26-02 : Dial Analysis Table for ARS/LCR

Dial Analysis Table Number
Item
Dial Digits (maximum 16 digits)
0 ~ 9, , #, or for wild character (Press line key 1)
*
0 = No Service (None)
1 = Route to Trunk Group
2 = Select F-Route Access
If Service Type 1 (in 26-02) : Select Trunk Group Num-
ber
0 ~ 25 (Trunk Group Number 0 = No Route)
If Service Type 2 (in 26-02) :
F-Route Time Schedule Not Used = 0 ~ 100
(F-Route Table Number).
Refer to Program 44-05 : ARS/F-Route Table on page
2-368.
F-Route Time Schedule Used = 0 ~ 100
(F-Route Selection Number).
Refer to Program 44-04 : ARS/F-Route Selection for
Time Schedule on page
0 ~ 16
0 ~ 15
0 ~ 25
0 ~ 16
Input Data
2-367.
Program 26 : ARS Service & Least Cost Routing
ISSUE 1.0
Routing
1 ~ 400
Related Pro-
Default
gram
No setting
0
0 44-04
44-05
0
0
0
0 26-12