Section 4 How To Exit Programming Mode; Program Mode - NEC SL1000 Programming Manual

ISSUE 1.0
change the passwords, use
Password User Name
nec-i
******
12345678 tech
0000 admin1
9999 admin2
S 4 HOW TO EXIT PROGRAMMING MODE
ECTION
To-exit the programming mode :
When you are done programming, you must be out of a program option to exit (pressing the Mute key
will exit the program option).
1 Press Mute key to exit the program options, if needed.
2 Press Speaker. If changes were to the system programming, "Saving System Data" is displayed.
3 The display shows "Complete Data Save" when completed and exits the telephone to an idle
mode.
Programming Manual
90-02 : Programming Password Setup on page

Program Mode

(SL1000)
Program Mode
Base Service OP1 OP2
(SL1100)
Level
Manufacture Level (MF) :
1 (MF)
80-02, 81-04, 81-05, 82-02 (SL1000) , 82-05, 82-08 (SL1100)
Installation (IN) :
2 (IN)
All programs in this section not listed for MF, SA, & SB
System Administrator - Level 1 (SA) :
10-01, 10-02, 10-12, 10-13, 10-14, 10-15, 10-16, 10-17, 10-18, 10-23, 10-
24, 10-25, 10-28, 10-29, 10-45, 12-02, 12-03, 12-04, 12-08, 15-01, 15-07,
3 (SA)
15-09, 15-10, 15-11, 20-16, 20-34, 21-07, 21-14, 22-04, 22-11, 22-17, 25-
08, 30-03, 30-04, 32-02, 45-02, 84-22, 90-03, 90-04, 90-06, 90-07, 90-19,
90-57, 90-58, 90-59, 90-65
System Administrator - Level 2 (SB) :
4 (SB)
13-04, 13-05, 13-06, 13-11, 15-14 (SL1100) , 21-20
Program Mode
(SL1000)
Program Mode
Base Service OP1 OP2
(SL1100)
2-502.
Programs at this Level
SL1000/SL1100
1-3