Firmware Update Time Setting - NEC SL1000 Programming Manual

ISSUE 1.0
Level
IN
Description
Note: This program is available only via telephone programming and not through PC Programming.
Use Program 90-36 : Firmware Update Time Setting to define the data for the firmware update fea-
ture. This data is available to set from the PC Programming FW update feature.
The following firmware is available to update with this feature:
• main.bin
• Dspdbu.bin
• dsp.bin
• intradbu.bin is not supported
Input Data
Item No. Item
Firmware Update Sched-
01
ule Time
02 Update mode
03 Update Report
Sample Report
Result
Update Success
Update Fail
Update Fail
Update Fail
Conditions
None
Feature Cross Reference
None
Programming Manual
Program 90 : Maintenance Program

90-36 : Firmware Update Time Setting

Input Data
Year : 0 ~ 99
Month : 0 ~ 12
Day : 00 ~ 31
Hour : 00 ~ 23
Minute : 00 ~ 59
0 = Non Active
1 = Activated
Maximum 256
characters
Update Success
Update is fail. Since 'A' drive is not available.
Update is fail. Since main up is not exist on A drive.
Update is fail. Since Time is expired.
Default Description
0 Set the time to update the firmware
using a compact flash card.
0
Time registration fails if an expired
time is registered.
0
0
0
0 Activate the Firmware Update fea-
ture. If this setting is 1, new firmware
on the compact flash card updates
according to the setting at 90-36-01.
- Output a report when the update is
executed and saves one copy on the
system. If a new update occurs, the
new report overwrites the old report.
Refer to the Sample Report on this
page shown.
Report Display
SL1000/SL1100
Program
90
2-551