Mitsubishi Electric Got 1000 Training Manual page 175

(2) Cable connection
1) Connection method for bus connection cable
2) Connection method for USB cable
(3) Access the PLC by GX Developer.
The following describes the procedures for monitoring the PLC by GX Developer
using the FA transparent function.
Refer to the GX Developer Version
procedures for GX Developer.
(a) Connectting to PLC
(Next page)
Connect the bus connection cable to the bus
connection unit on the GOT.
Connect the USB cable to the USB interface on
the GOT.
Operating Manual for details on operation
1) Click [Online] → [Read from PLC] in GX
Developer.
2) Set [PLC Series] of [Select PLC series] to
"QCPU (Q mode)".
Appendix 21