Mitsubishi Electric Got 1000 Training Manual page 26

<Action description>
(GOT)
Touch.
Operation Lamp
Operation Stop
Data 0
(GOT)
Turn ON.
Operation Lamp
Operation Stop
Data 0
(GOT)
"123" is displayed.
Stop Operation Lamp
Operation
Data 123
(GOT)
Touch.
Operation Lamp
Operation Stop
Display turns OFF.
Data 123
(PLC CPU)
Turns ON.
M0 M1 Y10
Y10
Y10
MOV K123 D10
(PLC CPU)
Turns ON.
M0 M1 Y10
Y10
Y10
MOV K123 D10
(PLC CPU)
"123" is stored into D10.
Y10
M0 M1
Y10
Y10
MOV K123 D10
(PLC CPU)
M1 turns ON. Y10 turns OFF.
M0 M1 Y10
Y10
Y10
MOV K123 D10
(1) While the touch switch "Operation" on the
GOT is being touched, the bit device "M0" has
been ON.
(2) When the bit device "M0" turns ON, the bit
device "Y10" turns ON.
Also, the ON figure is displayed on Operation
Lamp in which the monitor device has been
set to the bit device "Y10".
(3) As the bit device "Y10" has been ON, "123" is
stored into the word device "D10".
"123" is also displayed in the numerical
display on the GOT in which the monitor
device has been set to the word device "D10".
(4) While the touch switch "Stop" on the GOT is
been touched, the PLC CPU bit device "M1"
has been ON.
The PLC CPU bit device "Y10" turns OFF,
and Operation Lamp turns OFF.
2 - 2