Mitsubishi Electric Got 1000 Training Manual page 187

Display Method
The display color, operations, etc. can be changed for each specified range.
The display area corresponding to monitor device value is specified by a comparison
expression.
Download
To transfer screen data from the GT Designer2 PC to a GOT.
Since data can be transferred divided by screen unit, comment, and part, you can download
just the screen data you need for the circumstances.The reverse operation, of picking up
screen data, is called uploading.
E
Edge trigger
A trigger that updates the data display when the rising or falling edge of the specified bit is
detected.
Even if the trigger is not generated, the data can be forcibly displayed ON at the first time after
the screen is switched.
Edit Vertex
This is an editing function for changing the position of vertices of polygons or consecutive
straight lines after drawing.
EL
Electro Luminescence; an orange/black monochrome display device
One type of display element
The same as LCDs, ELs have low brightness and are eye friendly.
EN Standard
Indicates a product that conforms with EC directives.
The EN Standard is one standard in EC directives (laws).
There are three main relevant EC directives: EMC directives, low-voltage directives, and
mechanical directives. The EN Standard is the standard used for products meeting these
directives. (e.g., safety)
Extension cable
This cable connects the PLC extension base (basic base) and the GOT when the PLC and
GOT are connected with a bus connection.
Extension file register (R)
These are file register extension registers in the PLC memory cassette.
The extension file register capacity is set with parameters.
The capacity that can be set depends on the CPU used and the memory cassette capacity.
Indicated with R with MELSEC-A.
Indicated with R and ZR with MELSEC-QnA.
Appendix 33