Mitsubishi Electric Got 1000 Training Manual page 48

(From previous page)
(Next page)
(3) When the left screen appears, check [Use
Communication Settings].
With the Communication Settings, perform
the following settings.
1) Standard I/F Settings
Settings
communication interface on the GOT
(Standard
I/F-2:USB).
• CH No. ···· Select a CH No. that matches
• I/F ············ Communication interface type
• Driver······· Select the PC communication
• Detail setting····
2) Extend I/F Settings (first stage to third
stage)
Settings are performed for the
communication unit in the GOT extend
interface.
4 - 8
are performed for
I/F-1:R-232, Standard
the usage.
0 : not used
1 to 4 : FA device, for
microcomputer
connection (The
communication
settings must be
made according to
the channel No. to
be connected)
8 : For bar code
reader connection
9 : For host (PC)
connection (default)
is (2 types) displayed.
RS232 : For communication
with PC (GT
Designer2), PLC, and
microcomputer.
USB : For communication
with PC (GT
Designer2). (default)
driver to be installed in the
GOT.
Perform the settings including
driver baud rate, data size,
etc.
the