(1) System settings for GOT
The GOT type to be used and the color are set.
1)
2)
3)
(2) Communication Settings
The connection method for the device to be connected to GOT is set.
(The settings made here can be changed later.)
For details on communication settings, refer to section 4.2.2.
1)
2)
3)
4)
(Next page)
1)
When the left screen appears, set the GOT
type and the color as follows.
GOT type: GT15**-S (800 × 600)
Color setting: 256 colors
2)
After the selection is made, click the Next
button.
3)
The left screen is displayed.
Confirm the settings.
Click the Next button.
1)
When the left screen appears, set the device
to be connected as follows.
Controller: MELSEC-Q (multi)/Q motion
(The training machine is a multiple CPU
system, so select the multiple CPU system.)
2)
Click the Next button.
3)
When the left screen appears, set the
connection I/F as follows.
I/F: Extended I/F-1 (first stage)
4)
Click the Next button.
4 - 3