Chapter 2 About Got Operation 2- 1 To; Summary Of Operation - Mitsubishi Electric Got 1000 Training Manual

Chapter 2 GOT Operation

2.1 Summary of operation

Bus connection cable
GOT enables reading and writing to PLC CPU device memory (bit, word) with the
switches, lamp display, numerical display/input, message display, etc. on the GOT
screen.
With GT Designer2, display pane figures called objects: —such as the switch figure,
lamp figure, and numerical display, etc., —are pasted on the GOT screen.
GOT functions can be executed by setting operation functions of the PLC CPU device
memory (bit, word) to each pasted object.
This chapter explains the GOT operation in connection with the PLC CPU when the
switch (touch switch) or numerical display are set as shown below.
<System example>
Sequence program
PLC CPU
M0
Y10
Y10
Operation Stop Operation Lamp
Data 1 123
GT15
M1 Y10
MOV K123 D10
2 - 1
<Settings of GOT for figures>
Touch switch setting
Bit momentary
Write device : M0
Touch switch setting
Bit momentary
Write device : M1
Lamp display setting
Bit
Read device : Y10
Numerical display
Read device : D10, unsigned BIN
Display : Unsigned decimal number