Toshiba e-studio200l Service Manual page 173

Classifi-
Code
cation
1138 Network LDAP search method set-
ting
1139 Network LDAP authentication set-
ting
1140 User Restriction of the template
interface function with the adminis-
trator privilege
1145 Mainte- Counter notification
nance Remote FAX setting
(Remote)
1372 Counter Heater and energizing time
accumulating counter Dis-
play/0 clearing
1376 Counter Toner cartridge drive
counter
1378 Counter Counter for period of time
fuser unit is at ready tem-
perature
1380 Counter Counter for period of time
fuser unit is at printing tem-
perature
June 2004 © TOSHIBA TEC
Setting mode (08) <e-STUDIO200L/230/280>
Default
Func- <Accept-
Items
tion
value>
ALL
ALL
ALL
ALL
ALL
<8 digits>
ALL
<8 digits>
ALL
<8 digits>
ALL
<8 digits>
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 137
RAM Contents
able
0 SYS Sets the search method
<0-3> when performing a
LDAP search.
0: Partial match
1: Prefix match
2: Suffix match
3: Full match
0 SYS 0: Not authenticated
<0-1> 1: Authenticated
0 SYS Selects the restriction of
<0-1> the template function
usage setting.
0: No restriction
1: Only available with
the administrator
privilege.
- SYS Maximum 32 digits
Enter hyphen with the
[MONITOR/PAUSE]
button.
0 M Counts up the heater
control time accumu-
lated (when power of
the equipment is ON)
but does not count at
the Sleep Mode. When
the counter value of the
fuser roller is cleared,
this counter value is
also cleared in sync at
the PM support mode.
0 M Counts the rotation
number of the toner
cartridge.
0 M Counts up the heater
control time accumu-
lated (when the equip-
ment is at ready status).
When the counter value
of the fuser roller is
reset, this counter is
also reset in sync at the
PM support mode.
0 M Counts up the heater
control time accumu-
lated (during printing).
When the counter value
of the fuser roller is
reset, this counter is
also reset in sync at the
PM support mode.
Proce-
dure
1
2
1
1
11
1
1
1
1