Toshiba e-studio200l Service Manual page 249

Classifi-
Code
cation
1422 Data HDD data overwriting type
overwrite setting
kit
1424 Data HDD data clearing type
overwrite setting (forcible clearing)
kit
1426 Data Forcible HDD data clearing
overwrite
kit
1427 Data Forcible NVRAM data all
overwrite clearing
kit
1428 Data Forcible SRAM backup
overwrite data all clearing
kit
1429 User Margin width
interface (Top/Bottom, Left/Right)
1430 User Margin width
interface (Bookbinding margin)
1431 Network ACC
(AT_CASETTE_CHANGE)
for Printer/Box printing
1432 Network Mode only for Private Print
June 2004 © TOSHIBA TEC
Setting mode (08) <e-STUDIO202L/232/282>
Default
Func- <Accept-
Items
tion
value>
ALL
ALL
ALL
ALL
ALL
ALL Front: 7/
Back: 7
<2-100/-
100-100>
ALL
<2-30>
ALL
ALL
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 213
05/11
RAM Contents
able
0 SYS Select the type of the
<0-2> overwriting level; LOW,
MEDIUM, or HIGH for
deleting HDD data.
(This setting is enabled
only when the GP-1060
is installed.)
0: LOW
1: MEDIUM
2: HIGH
0 SYS Select the type of the
<0-2> overwriting level; LOW,
MEDIUM, or HIGH for
deleting HDD data.
(This setting is enabled
only when the GP-1060
is installed.)
0: LOW
1: MEDIUM
2: HIGH
- - HDD data is cleared in
the procedure set in 08-
1424.
* This setting is
enabled only when
the GP-1060 is
installed.
- - When this code is per-
formed, the equipment
cannot be started up.
* This setting is
enabled only when
the GP-1060 is
installed.
- - When this code is per-
formed, the equipment
cannot be started up.
* This setting is
enabled only when
the GP-1060 is
installed.
SYS This setting is not
reflected in "Right",
even if the value less
than 2 is set for "Back".
14 SYS
1 SYS 0: ACC prohibited
<0-2> 1: Only in the same
paper direction
2: In both same direc-
tion and different
directions
0 SYS 0: Normal mode
<0-1> 1: Mode for Private
Print
Proce-
dure
1
2
1
3
3
3
10
1
1
1