Toshiba e-studio200l Service Manual page 42

Error code Classification
EAE0 Finisher jam
EAF0 Finisher jam
(Finisher unit)
EB30 Finisher jam
EB50 Paper transport jam
EB60
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
Contents
Receiving time time-out jam: The printing has been
interrupted because of the communication error
between the equipment and finisher when the
paper is transported from the equipment to the fin-
isher.
Stack return jam: It cannot load the paper which
passed through the delivery roller on the intermedi-
ary process tray. [MJ-1022]
Ready time time-out jam: The equipment judges
that the paper transport to the finisher is disabled
because of the communication error between the
equipment and finisher at the start of printing.
Paper remaining on the transport path: The multiple
feeding of preceding paper caused the misfeeding
of upcoming paper.
Paper remaining on the transport path: The multiple
feeding of preceding paper caused the misfeeding
of upcoming paper (redetection after no jam is
detected at [EB50]).
2 - 6
Troubleshooting
P. 5-46
P. 5-44
P. 5-46
P. 5-12
P. 5-14
June 2004 © TOSHIBA TEC