3.12 Adjustment of the Finisher (MJ-1022)
3.12.1
Adjusting the jogging plate width
<Procedure>
(1)
Remove the right inner cover and the rear cover.
(2)
Adjust the front jogging plate to the home
position.
•
Set SW1 on the finisher controller PC
board as shown in
•
Press SW2 twice on the finisher controller
PC board.
-
The front jogging plate moves to the
home position.
(3)
Adjust the rear jogging plate to the home
position.
•
Set SW1 on the finisher controller PC
board as shown in
•
Press SW2 twice on the finisher controller
PC board.
-
The rear jogging plate moves to the
home position.
(4)
Measure the jogging width (standard at 317 mm).
e-STUDIO200L/202L/230/232/280/282 ADJUSTMENT
P.3-84 "Fig.3-109 ".
P.3-84 "Fig.3-110 ".
3 - 84
ON
1
2
3
4
Fig.3-109
ON
1
2
3
4
Fig.3-110
Rear jogging plate
home position
Jogging width
317mm
Fig.3-111
5
6
7
8
5
6
7
8
Front jogging plate
home position
June 2004 © TOSHIBA TEC