Toshiba e-studio200l Service Manual page 218

Classifi-
Code
cation
486 Laser Timing of auto-clearing of
polygonal motor pre-run-
ning rotation
488 Laser Setting of polygonal motor
type
489 Laser Polygonal motor rotation
number on standby
490 Laser Polygonal motor rotation in
the energy saving mode
491 Transfer Transfer charger bias cor-
rection (H) at duplexing
492 Transfer Transfer charger bias cor-
rection (C) at duplexing
493 Transfer Transfer charger bias cor-
rection (L) at duplexing
502 Image Error diffusion and dither
setting at photo mode
503 User Default setting of density
interface adjustment
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
Setting mode (08) <e-STUDIO202L/232/282>
Func-
Items
tion
ALL
ALL
ALL
ALL
ALL
ALL
ALL
PPC
PPC
2 - 182
05/11
Default
<Accept-
RAM
able
value>
0 SYS Switches the polygonal
<0-2> motor to the standby
rotation when a certain
period of time has
passed from the pre-
running. At this code,
the period to switch the
status to the standby
rotation is set.
0: 15 sec.1: 30 sec.
2: 45 sec.
* This setting is effec-
tive when "0" or "2"
is set at 08-483.
0 M Set the type of polygo-
<0-3> nal motor.
0: 2-clock type
1: 3-clock type
2: 4-clock type
3: 4-clock type
5 M 0: 38,090.55 rpm
<0-5> 1: 35,000 rpm
2: 30,000 rpm
3: 25,000 rpm
4: 20,000 rpm
5: 10,000 rpm
0 M 0: Stopped
<0-1> 1: 10,000 rpm
149 M Corrects the transfer
<0-255> charger bias output
value of the leading
edge area of paper at
duplexing.
139 M Corrects the transfer
<0-255> charger bias output
value of the center area
of paper at duplexing.
128 M Corrects the transfer
<0-255> charger bias output
value of the trailing
edge area of paper at
duplexing.
1 SYS Sets the image repro-
<0-1> duction method at
photo mode.
0: Error diffusion
1: Dither
0 SYS 0: Automatic
<0-1> 1: Manual (Center)
Proce-
Contents
dure
1
1
1
1
1
1
1
1
1
June 2004 © TOSHIBA TEC