Toshiba e-studio200l Service Manual page 371

[B] Adjustment
(1) Close the RADF.
(2) Adjust it by turning the adjustment screws on the hinges.
• Adjust the height on the rear side by means of the screw on the hinge on the feed side of the
RADF.
Turn it clockwise ................. Heightened
Turn it counterclockwise ...... Lowered
• Adjust the gap on the rear side by means of the screw on the hinge on the feed side of the
RADF.
Turn it clockwis .................... Lowered
Turn it counterclockwise ...... Heightened
June 2004 © TOSHIBA TEC
Fig.3-93
Fig.3-94
e-STUDIO200L/202L/230/232/280/282 ADJUSTMENT
3 - 75
05/11
3