6.25 State Of Plant; Messages - Siemens RVS41.813 User Manual

Messages

Only RVS41..
State heating circuit
State DHW
Siemens Switzerland Ltd
HVAC Products
Display of 0 V means that there is no voltage and the respective input is currently
inactive. Display of 230 V means that voltage is present at the respective input so that it
is activated.

6.25 State of plant

The current operating state of the plant is visualized by means of status displays.
Line no. Operating line
8000 State heating circuit 1
8001 State heating circuit 2
8002 State heating circuit P
8003 State DHW
8004 State cooling circuit 1
8006 State heat pump
8007 State solar
8010 State buffer
8011 State swimming pool
8022 State supplementary source
Enduser (info level)
Limit thermostat has cut out
Manual control active
Floor curing function active
Heating mode restricted
Forced discharging
Heating mode Comfort
Heating mode Reduced
Frost protection active
Summer operation
Off.
Enduser (info level)
Limit thermostat has cut out
Manual control active
Draw-off mode
Recooling active
User manual RVS61.843, RVS41.813
6 The settings in detail
Commissioning, heating engineer
Limit thermostat has cut out
Manual control active
Floor curing function active
Overtemp protection active
Restricted, boiler protection
Restricted, DHW priority
Restricted, buffer priority
Forced discharging buffer storage tank
Forced discharging DHW
Forced discharging heat source
Forced discharging
Overrun active
Opt start control + boost heating
Optimum start control
Boost heating
Heating mode Comfort
Optimum stop control
Heating mode Reduced
Frost protection room active
Frost protection flow active
Frost protection plant active
Summer operation
24-hour Eco active
Setback Reduced
Setback frost protection
Room temp lim
Off.
Commissioning, heating engineer
Limit thermostat has cut out
Manual control active
Draw-off mode
Recooling via collector
Recooling via DHW/HCs
Discharging protection active
Charging time limitation active
DHW charging locked
213/258
CE1U2355en_02
28. September 2009