Table of Contents
Advertisement
7.6.1.7 Flash ROM
Test equipment: none.
Purpose: Verify the Flash ROM exist data.
Test Method: Sum the WinCE or self diagnostic or total image as checksum and then map checksum into a
index table to get the WinCE or self diagnostic or total image version.
Display the PASS/FAIL=checksum (4bytes) on the panel bottom.
Leave method: Touch pen, Serial port, Home button
--- Provide for Flash ROM test. When this test is executed, system will show as below.
a. If checksum is ok, system will show checksum information on message display area
b. If checksum is failed, system will show checksum information and "Fail" with red color on message
display area.
Barracuda PDA Maintenance
105
Advertisement
Table of Contents
