Power On Test - NEC Barracuda Service Manual

7.5.2 Power On Test

1. Connect the AC adaptor and power on the PDA. ( Figure 7.5.2 -1 )
2. Tap the Target firmly on the Screen. ( Figure 7.5.2 -2 )
3. Tap the target firmly and accurately at each location on the screen. The target will continue to move until the screen is aligned.
If setup success , the picture will jump to next.
Verify: Picture show on screen. ( Figure 7.5.2 -3 )
Figure 7.5.2 -1 Power on PDA.
Barracuda PDA Maintenance
Figure 7.5.2 -2 Tap the Target firmly
on the Screen.
Figure 7.5.2 -3 Tap "Next" button
and jump to next Screen.
93