Table of Contents
Advertisement
Barracuda PDA Maintenance
2.3.6 LCD Panel & Switch Board
Disassembly
1. Remove the Battery Pack. (See section 2.3.1 Disassembly)
2. Remove the Rear cover. (See section 2.3.2 Disassembly)
3. Remove the Memory PCB Board . (See section 2.3.3 Disassembly)
4. Remove the Mother Board PCB. (See section 2.3.4 Disassembly)
5. Remove the Front Cover. (See section 2.3.5 Disassembly)
6. Carefully separated the LCD Panel from the Frame. (Figure 2-15)
7. Slight lift up the LCD Panel and the Switch Board. (Figure 2-16)
Figure 2-15 Separated the LCD Panel
Figure 2-16 Slightly lift up the LCD Panel
from the Frame
and the Switch Board
Reassembly
1. Replace the LCD Panel & Switch Board into the Frame well. (Figure 2-15)
2. Reassembly the Front Cover. (See section 2.3.5 Reassembly)
3. Reassembly the Mother Board PCB. (See section 2.3.4 Reassembly)
4. Reassembly the Memory PCB Board . (See section 2.3.3 Reassembly)
5. Reassembly the Rear Cover. (See section 2.3.2 Reassembly)
66
6. Reassembly the Battery Pack. (See section 2.3.1 Reassembly)
Advertisement
Table of Contents
