Select Auto Test - NEC Barracuda Service Manual

7.5.4 Select Auto Test

1. After Tap the cross at 4 corners as picture Figure 7.5.3 –3,you can see the Diagnostic Manager V0.9 menu items. ( Figure 7.5.4 -1 )
2. Select autotest.The system will execute as below: ( Figure 7.5.4 -2 )
Verify: Display test Brightness test
VR test H pattern test
3. After the system finish the first cycle test,press "Record Button",until it was displayed as "Hot-key 1 to leave".Then press
"Button1" to return Main Menu.
Figure 7.5.4 -1 Enter D.M.
Barracuda PDA Maintenance
LED Audio test
EEPROM & CPU test.
EEPROM Info test
BOD:00/00/57
SN:100002020119
EEPROM Info test Pass
Cpu test Pass
Display test Pass
Error Record
HotKey-1 to leave
All passed
Error Record
HotKey-1 to leave
All passed
Figure 7.5.4 -2 Select Autotest
Flash ROM & Checksum test
Figure 7.5.4 -3 Press " Record ",
then " button1 " to enter Main Menu.
Video RAM test RTC test
EEPROM Info test
BOD:00/00/57
SN:100002020119
EEPROM Info test Pass
Cpu test Pass
Display test Pass
Error Record
HotKey-1 to leave
All passed
Error Record
HotKey-1 to leave
All passed
97