Inserting The Switch Module In The Blade Server - Fujitsu Brocade 6545 Gen5 Hardware Reference Manual

2

Inserting the Switch Module in the blade server

Inserting the Switch Module in the blade server
Perform the following procedure to insert the Brocade 6545 16 Gbps FC Switch Module in the
Fujitsu PRIMERGY BX900 S2 or BX400 Blade Server.
1. Unpack the Brocade 6545 16 Gbps FC Switch Module from its shipping box, as described in
2. Verify that the Fujitsu PRIMERGY BX900 S2 or BX400 Blade Server I/O module bay into which
NOTE
The Brocade 6545 16 Gbps FC Switch Module is designed to work in specific I/O module bays in the
Fujitsu PRIMERGY BX900 S2 and BX400 Blade Servers. Do not insert the Switch Module in any other
slot as it will not work.
1
3
5
1
2
3
FIGURE 3
14
"Unpacking the Switch Module"
the Switch Module is being inserted is empty.
A maximum of four Switch Modules can be installed in the Fujitsu PRIMERGY BX900 S2 Blade
Server. When inserting a Switch Module in the Fujitsu PRIMERGY BX900 S2 Blade Server, use
I/O module bays 3 through 6, as shown in
Connection blade slot 1
Connection blade slot 2
Connection blade slot 3
Fujitsu PRIMERGY BX900 S2 Blade Server I/O module bays
on page 11.
Figure 3.
4 Connection blade slot 4
5 Connection blade slot 5
6 Connection blade slot 6
Brocade 6545 Gen5 16-Gbps FC Switch Module Hardware Reference Guide
53-1003184-01