Fujitsu Brocade 6545 Gen5 Hardware Reference Manual page 42

3
Changing from Fabric OS Native to Access Gateway mode
5. From the Switch Status section, click Disable.
6. From the Access Gateway Mode section, click Enable.
7.
8. When prompted, click Yes to restart the Switch Module in Access Gateway mode.
30
NOTE
It is recommended that you save the current configuration file before converting the Switch
Module to Access Gateway mode. To save your current configuration, click the Show Advanced
Mode button in the top right-hand corner of the Switch Administration window. Select the
Configure tab, then select the Upload/Download tab. Enter the relevant information to upload
the configuration file.
Click Apply.
The current Web Tools session closes; relaunch Web Tools after the Switch Module reboots.
Brocade Gen5 6545 16-Gbps FC Switch Module Hardware Reference Manual
53-1003184-01